Post your Cam Cards in this thread for reference by other members

Used cam I picked up from a member here on the board. I have never used it but it is a Scotty Brown Cam

 

This cam moved 3800lbs consistently to 11.80’s ET’s with a best of 11.67. 430 cid, TA Stage1 heads 10.50:1 compression, 3:90 rear gear. Drive anywhere

 

Crane Cams Blue Print series Stage 2 camshaft

 

470 with 1.7 rockers

 

T/A 212 cam for 455. Specs are a little different than what's in their catalog.

 

Reed cam from GSCA. Used with 462, iron stg. 1 heads.

 

TA 288-94H Camshaft for 455. Again the specs are different from what's in their catalog.

 

TA-290H

 

Erson TQ 50 H

 

I have this one at home that I plan to drop in a 430 I am assembling.

 

I ran this in the distance past. Ran good with home ported heads. Also ran many, many different cams. Most interesting to me was a South Side Machine NHRA cheater cam. Still have . I never sell anything lol. But I will be. I’ll find the card on that. Huge duration and think 490 490 lift. Looks like a roller. Also have I think a KB mark5, but for sure a mushroom cam along with the mushroom lifters which looks so cool. That cam has the looks of a huge roller cam. If I had my KB Catalog here could look it up but at work.
Pick of the Poston 105. Which was a copy of I think a KB cam

 

My version of the KB C118 , purchased in +/- 1978 and installed in my 73 Stage car

 

TA 290hl hydraulic 540/540 240/240 @ .050 supposed to be a great fit for the TA Stage 2 SE heads. Should be ready to stomp by spring.

 

My NOS KB Mark 7M mushroom cam card. Also have the NOS mushroom lifters. Great with Stg2 heads…and huge. Looks like a roller cam.

 

KB Mark 8S solid flat cam card.

 

TA 286-92H 455 which isn’t posted on their website

 

I picked up a left over parts lot from a local guy this week and ended up with two camshafts. I have a TA510 and a TA290-94H in my big block Buick parts horde now. I am not sure I will ever use the TA510 as that is a pretty rowdy cam for street use but the TA290-94H could come in handy soon. I did not see a TA510 cam card in the posts here so thought I would share.
Greg

 

TA 413 HL Roller cam arrives on Tuesday after being on the waitlist since April 2021. I will post the cam card soon.

 

That's a fair bit different than the one I just got from them.