Its a complete car. The only options is trunk release, power drivers seat, AC, power windows, speed alert and max trac. Tony
Tony. I am intrested in the Max-Trac option. Everything involved from the switch to wiring harness. I also believe the left front spindle had a speedo cable going to it. That is how it could figure out if the front wheels were moving at a different speed than the rear wheels. There was also a module of some sort that used this info to short out the ignition to get the speed the same front and rear. Thanks. LOU
Tony. Just remembering a few things about Max-Trac. There is a logic box under the dash on the right side by the glove box and the wiring harness that goes from there to the dash switch. That same harness also goes thru the fire wall under the heater box then goes accross the cowl over the brake booster to the left front wheel. It also splits before going over the brake booster and goes to the speedo sensor on the trans. the left front wheel also has a sensor and bracket that would be needed. So to recap I would need: - Logic box. One plug at the logic box plugs into the existing instrument harness - All wiring harness - Dash switch. this switch plugs into the existing instrument harness. - Left front wheeel sensor and all hardware and bracket - Speedo cable housing and sensor and all mounting hardware at trans. Thanks. LOU
