Hi, sorry to be a pain, but this info is scattered over several different threads and I'm going nuts trying to find it all, so here I go, again: Who here as a GV unit in their car and what mods were needed to make it fit/work? I know to be converned about the tranny linkage and fan/shroud issues. I've talked to Rob at Stage 1 and Jim Weise about it and the issues with the cross brace on the floor that the seats bolt into. I've been told that if I remove the rubber insulators on the ends of the trans. cross brace and hard bolt it to the frame that will give me 1/4" or so. And I could use a poly tranny mount and cut it down to gain some more room. I've also seen what may need to be done to the tunnel to make this thing fit. What else should I know from those of you that have been there, done it? Thanks. Phil
