running thru the traps at about 80/90psi What is reccomended amout of oil to use. The current setup is a 9qt pan. using 9 quarts of oil at present time.
Phil I ran 7 QTS of 30 wt. Redline this past year. 68/6900 RPM at the finishline w/ 95 PSI. The bearings all look like "day1" and are going back in the motor for '04. PS Pressure was always good even on deceleration.
Gary WHAT OILING SYSTEM DO YOU USE OH YEA, I KNOW DON'T ANSWER THAT lololololol:laugh: :laugh: :laugh:
Gary, What are you running for an oil system? What about main and rod clearances? I'm sure there has been plenty of discussion on the board about the clearance topic. Thanks, Dennis
Gary thanks for the reply. This is for a good friend who is computerles for now. I will let him know your reply.:beer