What size are the valves and can you pm me or post me some pics. I want to use them on a set of TA stage 2 aluminum heads. Thanks Joe
OK, Fellas, I have all the measurements but not with me right now. They are same face diameter as Stage 1 valves but have slightly longer stems. I will post pics and measurements tonight if I can get home early enough. Cheers!
Here are the actual measurements and the note that came with the valves from Poston. Face of Intake valve is 2.125" / exhaust is1.75" Over all length of intake valve is 5.150" / exhaust is 5.195" Stem diameter is 0.369" both valves measure a 0.425" long keeper groove The measurement is 4.595" from the face of the intake valve to bottom of keeper groove / exhaust is 4.625" The measurement from the tip of the stem to top of keeper groove of intake valve is 0.125" / Exhaust is 0.135" Mark