New in Box - bought several years ago but never installed and I sold my RoadMonsters. Product ID: MCA0012 Lower Control Arm Set 1982-1996 GM B-Body Station Wagon (Caprice and Roadmaster) http://www.metcomotorsports.com/proddetail.asp?prod=MCA0012&cat=94 The Metco Motorsports high performance lower control arms for the B-Body wagon are CNC-machined from 6061-T6511 billet aluminum for unsurpassed strength and precision-fit. The control arms are clear-anodized for long-lasting surface protection. Our control arms are designed to be installed as a direct replacement for the factory control arms, but offer the benefits of the dramatically stronger billet design and Energy Suspension-brand polyurethane bushings. Each bushing has a grease fitting for long term, noise-free service. These arms require no modifications to the arms or to the vehicle for installation, and the exclusive Metco design facilitates the use of the factory Impala SS rear sway bar. The Impala SS swaybar mounts to the underside of each control arm using the two holes on each side located closest to the front of the control arm (see images 2 & 3 above). Billet aluminum spacers are included to mount between the sway bar and the underside of the control arm, and Grade 8 7/16"bolts are used to fasten the sway bar to the control arms. Product ID: MUC0001 Upper Control Arm Set 1982-1996 GM B-Body (Caprice, Impala SS, Roadmaster) http://www.metcomotorsports.com/proddetail.asp?prod=MUC0001 Stock Length The Metco Motorsports upper control arm is comprised of a precision-machined aluminum block housing a threaded steel pinion, a heavy-duty zinc-plated adjuster, and a precision-welded and powdercoated clevis. The combination of these premium components results in a control arm that can be installed as a direct replacement for the factory control arms, but offers the benefits of in-car adjustability, the firm response of polyurethane bushings, and an independently-verified 400% increase in strength. The Metco control arms require no disassembly for adjustment, and the user can even dial in the pinion angle with the vehicle's weight on the suspension. Prior to shipment, the arms are assembled on a jig and carefully set to match the length of the stock control arms for the intended application. No adjustment is required by the installer. Energy Suspension-brand polyurethane bushings are included for all pivot points to provide a ride quality befitting a high performance vehicle without the harshness of rod ends or heim joints. The design of the Metco control arm also provides additional clearance for oversize exhaust pipes routed over the axle. LIST PRICE - Upper Arms - $329.99 Lower Arms - $299.99 I'll sell the set for $550 deliverable to the BPG Nats for FREE !!
