Need a set of valve springs for my C113A cam please

Well Alan hooked me up STRONG (Thank you "Izanurse"!!!!) on some ported and polished original 70 Stage 1 iron heads, complete with T/A stainless valves and retainers and ARP head bolts : )

I still need springs that will play nicely with the used low mile C113A cam and some lock keepers if anyone has something. Can't wait to get this turkey running again! Been asleep since the 1990's but oil is super clean,no metal and spins freely!

Thanks in advance for any help and YES (!) I will horse trade if you care too! : )

 

Well,I do have a set of springs,my cam was a TA 413,they were discarded,as I went to a bigger cam,242 -258.And I can also sply you with the retainers .Think of a number for them Bruno.

 

Thank you Bruno, lemme research a little bit Sir and will PM you.

Regards,

John

 

Thank you for the offering on the used springs, Bruno.

Phillip66 and I have been helping each other out on parts and today there was a box on my doorstep of new Comp Cam springs.

I am a newbie on matching up valve train parts but hopefully these will be correct for my C113A cam.......

 

Way to much spring pressure, more suited for a roller cam, also, I'm guessing the OD of the springs are too big for your rockers.

 

Maybe I need to look at swapping someone for something better suited?
I am going to try and use my 72 stock short block with the 70 ported and polished Stage 1 heads that have also been milled a couple thousandseths,stock rocker assemblies and a set of copperhead gaskets I got from John Kemper before we lost him.So also concerned about valve clearance on the C113 A
Appreciate any advice

 

Well,sounds like I may need your used springs to go with my low mile C113A, Bruno.

Think yours will work with this application?

Thanks

 

I get some on the way monday with free mold on them

 

I am ready whenever you are .But this week I will be in your neck of the woods,I'm going racing with my son in NC, We will be there Friday and Saturday,so let me know.Bruno.

 

Thank you Bruno, If " Moldy 41's" don't work I will track ya down at the drags if you don't mind bringing them along Sir.
Good news on that one box I have in a picture above is that was just an available box for Phillips new motorbad news is we have no idea what they are! My life's story lol

 

Comp 910 is the stock replacement spring

 

Did the rabbid koons make it

 

No.......you must have duct taped them to a snail and said go to "Fritzeeeeeez" lol
We don't get shipments normally till after lunch time. Better not be a Jack in the box and give me a stroke lol

 

The cam Im useing is the mk 3 510 lift

 

Thank you Mister Jeff (41speciman)for the Stage 1 valve springs!!!

 

Woah just noticed the reply (specialman) cant spell when Im drunk hee hee and yes your welcome Dr Frittzzzanator