Most of a performance built 350. Shortblock, ported big valve heads, high comp forged

Most of a performance built 350. Short block, ported big valve heads, high comp forged pistons.

OK here's the list..

350 short block fully assembled with .030 over TRW high comp FORGED pistons. stock polished rods with ARP bolts. Complete assembly has been balanced with speed pro moly rings. Mains and rods set at .002. Pistons are .058 in the hole by my measurement.
New cam bearings, and freeze plugs. Neoprene rear seal. Includes the flywheel it was balanced with and most of the hardware and various other internal engine parts. Pickup, oil slinger etc..

Heads are '69s with TA's big valves installed. Nicely ported with the exhaust side polished. The stems have been cut down for the Viton seals. These are slightly used but inspected by my machinist. He said the springs would be fine with a medium lift cam, but that's all I know. No rockers..But includes TA adjustable pushrods..Lifters and a new timing chain Everything else looked fine. 52-54 CCs by my measurement. I don't have the best way to measure this.

New balancer on the front.

Gasket matched TA intake

Poston (I think) valve covers. with hold down hardware..

I want to sell this all together as a package deal $2000.. Negotiable.. I have no idea how to ship this.. Local pickup. Unless someone has a better idea.

If I can't sell this as a package deal I will break it up and make a seperate thread for each item. It's much easier to manage that way..

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

I have an interest Jay! That's quite a deal. You're in North Carolina right? The only way to get it to me would be to crate and freight. Why do you want to sell it?

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

The novelty wore off for me before the project was complete. Now I've sold the car it was going in.. It would be fun in a Jeep Cherokee though..:laugh: Boy would that ever be impossible.

I also have a bunch of oil pump parts.. Gears, booster plate, shims, gaskets, springs etc. that will go too..

I will explore the shipping options if you are truly interested.. I do have a dock I can ship from, and an unlimeted supply of pallets where I work.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Interested in the heads if you split things up. What a deal. I'd buy the whole thing if it wouldn't clean me out haha.
also interested in valve covers, timing chain and pushrods.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Sorry Jay...it's empty now.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Jeff.. I'll hold it for a while with even a very small deposit. Just something to know that you are really in it..

I'm sure I can figure out a way to ship it. I can build a wooden cradle and attach it to a pallet..

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Put me in line for the whole package

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

I got you! Define small please?

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Herb.. You are up..

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Are you going to the gs nats? Pm me your number.
Thanks
Herb

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

IN line in case of a deal falling through with herb

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Herb is considering it, but said to move on for now..

Sean, call me or e-mail me. 336-255-4126

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

I'd like to get in line for the whole package Jay If you could send me an email at delorean92(at)yahoo(dot)com if it gets to me I would appreciate it. Unfortunately I haven't been able to get on the site too much lately

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

I will take the whole package for sure if Jacob passes.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Sean I believe you are ahead of me in line for the whole package so as per board rules you have the first shot at it:beer I am definitely interested though if you decide to pass

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Thanks for noticing that.

Jay I will take it all 100%, will e-mail for more details.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Jay if you need to ship this I have a stand that AM&P makes for shipping and transporting engines. $50 (makes shipping a LOT easier)

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Hey Ryan, I will e-mail jay and ask him if he wants to use that stand you have.. If so I will paypal you the $ if that works?

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Sean,
That's fine. You will like the stand.

My Paypal is ryansgsx@hotmail.com. Just make it a gift and I will make sure jay gets the stand.

 

Re: Most of a performance built 350. Shortblock, ported big valve heads, high comp fo

Cool.. That makes thing alot easier.

Jay