will it work for a couple weeks at least? i blew out the damn thing on the driver's side AGAIN, but no one locally sells header gaskets and i'm planning on tearing open the top end in a few weeks, anyway. just wondering if anyone's ever done this in a pinch before and can tell me whether it works or not.
I use them on my GS. they last really well. I don't put too many miles on my car but the last set lasted all summer. They are easier to get than header gaskets, cheaper too!:grin: Adam.
gaskets if your headers mate flush with the manifold exhaust ports, before u install the gaskets, & and the stud holes line up, and if u use quality gaskets, they should last a long time . u must be prepared to re-torque the manifold bolts frequently regularly . gerry 72 gs 350 ht #s
they work On my 455 Regal I've taken 2 set and sandwiched them with high temp sealant and haven't had a leak in 3 yrs.The one thing to do is gasket match them to the heads/headers because they are slightly smaller. I will never use header gaskets again.They work out that good for me.
Ditto, ditto, ditto.....been using them for years now. Even if you have a blowout (which I've never had with them) they are really easy to change. I only use one unlike Dave but I goop 'em with red silicone and watch the bolts like a hawk for about a month or longer. Even years later I still check those bolts every few months.