Hi, i'm looking for the 1/4 window stainless piece for the passengers side, its for a 1967 buick gs. it holds the fuzzy strip. here's a picture. if you have both sides,i will buy both. thanks Michael
Michael I should have some of these but I thought they were brushed alu. not SS. They seamed to dent easy. I will look. Thanks Bill.
window piece Hi Bill, sounds good. this one is stainless. well i'm almost sure it is. one of mine has a few dings in it. I tried getting them out,but i did more damage. thanks Michael Hi TX, are the fuzzies new? how much? Michael
I have them too I have a set of all four with new fuzzies if it doesn't work out elsewhere let me know! Oh, I believe they are aluminum coated steel, I know if you use steel wool on them the aluminum coating will rub off, resulting in shiny steel underneath. (Found this out by "polishing" on the vinyl top trim pieces).
Pass side trim. Micheal here is a picture of the best one I have. It is still on the car. It look good not perfect needs cleaned and may have few small defect. Only has one small dent by the front not sure the pictue shows it. I wll take $20.00 plus shipping. What is the best way to get off the car? Thanks Bill.
tail light this has nothing to do with the part you need, but i see you have a 67 gs. i have a rear tail light here that i got from a junk yard and thought you may need it. i have no use for it and if you want it,then it's yours free.....mike
window stainless Hi Bill, sorry for the delay. we got almost 2 feet of snow,and i was busy plowing :bglasses: gives me extra money for the buick :beer i forgot to mention,that my car is a convertible,and the piece connects to another moulding. i'll add a picture tommorrow. thanks Michael Hi Mike, does the tailight have the pot metal part? or is it just the lens? Michael
Micheal I looked closer at you picture and can see it is a conv. The hardtop will not work. It appears that 66/7 hardtop used alum in the wide moulding. I know this because I have one of each on parts cars. I did part a 66 conv years ago and it does have SS. wide moulding. I found the L/R rear but did not fined the two pieces that go around the back of the well, or the front ones. Will keep looking for the rest of the set. Thanks Bill.
moulding Hi Bill, here's a picture of what i need. i really just need the passengers side. i'm also looking for both 1/4 glass tinted, for my 67. thanks Michael
Michael, I cannot find the rear chrome around the well and would like to sell it as a set. The chrome on the door that matches the quarter chrome in the picture is is SS or alum? As I said the 2 6/7 hardtops have alum and the 66 conv has the SS at least on the quarter trim. Anyone know. Thanks Bill.