KB 118 cam I have one of these used from one of my engines, have all the lifters as well, I left them positoned with the lobes they were with if it makes a difference. Used with synthetic oil, mild 455, it has 20,000 miles maximum useage, probably less, 80 dragstrip passes with a best time of 13:20 in a 4,000 lb car. If you're interested let me know. :3gears:
cam I would be interested...What kinda setup did you have? like heads pistons converter and rearend? with 80 passes on it and some mileage is there much noticable wear on the cam? What kinda lifters do you have with it? How much with cam and lifters?
KB 118 cam 73' Century with 3:42 gears, beefed up 8.5' 10 bolt, 26" Hoosier ''EMod" tires, stock converter, standard '70 heads freshened, 1.6 T&D roller rockers, Metco rear adustable control arms (no sway bar), engine strapped down, Edelbrock B4B intake, HEI ignition, Demon 850 carb with 1" aluminum spacer, Aeromotive fuel system, and the 118 cam with 5/16 pushrods. Hydraulic lifters are whatever Kenne Bell was using at the time, lobes have normal wear pattern on the noses, cam bearings looked great when dissasembled. If you want, I could bring the set to the Norwalk event for $75.
waterboxguy03 Hi,Ilooked at my stock of cams and I do not have the 118 cam.What I do have is 3 K-B cams.One is used Mark-3H the other two,one is NOS KB107, the other one is KB107,used.The two used ones are in very good condotion. I really thought I had the 118.Regards,BrunoD.
Waterboxguy03 Hi again,I just went back into my garage and I found the NOS 118 cam.So,if you are interested,PM me,BrunoD.
I also have a KB 188. Has about 20,000 miles on it. I don't want a lot for it. Would rather see it in a car than in my garage. Here are pictures of it as well as the card for it. PM my with an offer if you're interested. Tom