Let us know when you are ready to install and we will give you a few hundred different ways to do it.
I would strongly suggest you test fit the headers before you have them coated. Some headers will contact the casting boss on the pass side of the block and some others will be very close or touching the steering intermediate shaft and the disc brake prop valve. Also, be prepared to do some cussing and throwing tools! Installation is no walk in the park!:TU:
Yes it's for a g-body. Actually that's why I haven't repplied in a few days is because I put my in and still struggling with the headers. I could sure use the advice. thanks
Read this thread, it may help: http://www.v8buick.com/showthread.php?s=&threadid=30152&highlight=gbody+header+pic c/o the late Dave Dixon