just bought 71 gs clone

Discussion in 'The Bench' started by 71gsclone, Sep 17, 2004.

  1. 71gsclone

    71gsclone Member

    I just bought a 71 skylark, was wondering if I could get some information. I am new to this board and new to being a chevy owner, so as a result I know nothing about buicks or their value. I paid 2 grand for a 71 skylark, an original arizona car, no just, with many original gs part, for example the hood (perfect condition)not dents or bondo, the rear spoiler, and aircleaner assembly (ram air). what the car needs is some rear quarter work on the passenger side and a rear bumper, the rest of the body is very nice with only minor dings. also the interior could use a makeover. I havenot picked the car up yet so I haven't gone completly throught it, but it has a 350 that was rebuilt. does this sound like a good deal? I don't know what other gs parts are on it, I will find out as soon as I can figure out what other parts are specific to a gs car. Anyone know where i can locate the rear bumper any on the aftermarket? Let me know. thanks, and I will continue to post questions
     
  2. mechacode

    mechacode Well-Known Member

    Congrats on your purchase. Sounds like a good deal. You can probably find a bumper in the parts section on this board.
     
  3. 71gsclone

    71gsclone Member

    rear bumper

    are the bumpers interchangeable from year to year? or will only a bumper from a 71 work?
     
  4. 72 V Code

    72 V Code 71 72 GS GSX Fan

    71 Only

    Hi There,
    You'll need a 71 rear bumper to be correct,a 72 will fit but there are cosmetic differences.It seems like the 71 bumpers are getting rather hard to find..........Jeff
     
  5. DugsSin

    DugsSin Well-Known Member

    I am new to this board and new to being a chevy owner,
    Chevy owner??? :laugh: Just playing with ya but that's a bad typo round these parts. :blast:
     
  6. Dana/Beth Andrews

    Dana/Beth Andrews Huc accedit zambonis!

    71gsclone,
    Congrats on the car. Any pictures yet?
    You can try The Parts Place in Elburn IL. for replacement bumpers, you will need to send them a core.
    Oh & BTW Welcome to the board :beer we are a friendly bunch, lots of help & parts can be found here.

    Beth :grin:
     
  7. ricknmel67

    ricknmel67 Well-Known Member

    If it's a 71GS clone, with a real 71 GS grille..... you got a smokin' good deal!
    Those grilles are a 1 year only item, and are VERY hard to find.
    Chances are, it has regular 71 Skylark grille in it. But it still sounds like a pretty good deal if it's in decent shape.

    We'd love to see some pictures of your new project. :TU:
    :beer
     
  8. John Eberly

    John Eberly Well-Known Member

    71 Clone

    The bumper can probably be straightened and rechromed unless it's rusted or bent really bad. You can get this done for a couple hundred bucks if you shop around. There was a through the bumper exhaust option (N25) with big rectangular tips - looks really nice.

    There are reproduction quarter panels available if you need them. New old stock (NOS) GM quarter panels are expensive but better quality.
     
  9. 71gsclone

    71gsclone Member

    I will try and get pics on here when I get the car home. and yes, the grille is just a skylark grille. I don't believe the bumper can be straightened, the car was hit on the lower rear quarter at an angle so it hit the bumper and pulled it out at an angle. I will try and find a 71, but a 72 will fit? what are the differences? are the taillights the same?
     
  10. Marco

    Marco Well-Known Member

    Hi -

    Welcome. What's your name? We're all pretty friendly around here and we appreciate if we know how to properly address you.

    The taillights are different. 1971 has 6 or 8 screws, I can't remember :Dou: , and the 1972 has 4 screws per lense. The lense itself is also different.

    Bumpers are also different - 1972 had a 'Buick' nameplate and rubber surrounding the taillights.

    Same dimentions, but a different look - you can thank Buick :spank:
     
  11. MandMautomotive

    MandMautomotive Well-Known Member

    Where in AZ? I am in Mesa and work in Phoenix. I have some 71 stuff if you need something let me know. What are your plans for the car?

    John
     
  12. 71gsclone

    71gsclone Member

    I also happen to live in mesa and work in az. I'm picking up the car tomorrow. It will also need the passenger side axle replaced? but I am not sure on what rear end is in the car, i know it's a 10 bolt, but someone told me it might me an 8.5 or 8.2. I have no idea, I was going to wait to get one after I pulled it out. Other than that, all i need is basically cosmetic stuff, the interior needs redone, but I can get most of it through the aftermarket. What kind of stuff do you have?
     
  13. 70gsrick

    70gsrick 1 of 66

    Welcome to the board. It's great to have another AZ Buick guy around. Good luck, it sounds like you have a great start. :TU:
     
  14. MandMautomotive

    MandMautomotive Well-Known Member

    I have lots of little stuff. Speedometers, clocks, drums, spindles, brackets, distributors, 350 V8 core motor, wiring, turn signal lamps, 350 fan shroud, 14" painted ralley wheels etc. Need to clean out some stuff. If you need something I could deliver it. Any excuse to drive the car. Also can help you find parts in town, like the axle. You should have an 8.5 check this link and site out.

    http://www.buickperformance.com/85rear.htm

    John
     
  15. 71gsclone

    71gsclone Member

    thanks, one of those clocks might me on the list, I noticed it was missing from the car and there was a tach in it's place, I would kind of like to keep it the way it's supposed to be. If you know of any place locally where I can pick up an axle let me know.
     
  16. MandMautomotive

    MandMautomotive Well-Known Member

    If it is a Buick tach I would keep it. Let me know if it's an 8.5

    John
     
  17. 71gsclone

    71gsclone Member

    I will let you know tomorrow on the rear, the tach is aftermarket, in place of the clock
     
  18. 71gsclone

    71gsclone Member

    the rear is an 8.5, let me know if you can find an axle for the passenger side
     
  19. MandMautomotive

    MandMautomotive Well-Known Member

    I will see what I can find on Monday
     
  20. 71gsclone

    71gsclone Member

    thanks, I would appreciat it

    mike
     

Share This Page