Ignition/Steering Actuator Gear

Discussion in 'Parts for sale' started by FOOBL, Jun 25, 2019.

  1. FOOBL

    FOOBL Member

  2. BrianTrick

    BrianTrick Brian Trick

    6E595DDE-C528-4C28-880E-2D3AC5169EB0.jpeg Try this place.
     
  3. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

  4. FOOBL

    FOOBL Member

    Thank you!
     
  5. FOOBL

    FOOBL Member

  6. mrolds69

    mrolds69 "The Cure"

    That's more commonly called a sector gear if you are still on the hunt. Tilt and non tilt differ. At least 69-73 should fit maybe later.
     
  7. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

  8. mrolds69

    mrolds69 "The Cure"

    Right Larry, they are not as common. Dorman repro's the other one. It's hard to get somebody to sell that one piece off a tilt unless they build or part them. I've worked on a lot of columns and never seen a broken one, actually.
     
  9. 75Riv

    75Riv A.K.A. Harry Clamshell

  10. 75Riv

    75Riv A.K.A. Harry Clamshell

    Found out the hard way on an A body; earlier somebody put in a 5 teeth sector gear on a 7 tooth rack gear (or the other way around) in a (year unknown) tilt floor column.... wearing out the rack gear.
    Now not knowing what to choose: a 5/6 or 6/7 combination
     
  11. BrianTrick

    BrianTrick Brian Trick

    I bought a few of the 6-tooth sector gears 2 months ago. About $50.00 each. I also found that Dorman sells a slide/sector gear kit. The Dorman kit has a 5-tooth sector gear,but they redesigned the teeth on the slide to accommodate. I bought a few of those kits as well,and they will work.
     
    75Riv likes this.
  12. Bigpig455

    Bigpig455 Fastest of the slow....

    Here to say - dont cheap out on this. the 6-7 tooth set is generally 150.00 wherever you find it. Did two columns over the last couple years and the while the 5-6 gear set works I had to give up accessory position on one of the columns...
     
    75Riv likes this.
  13. 75Riv

    75Riv A.K.A. Harry Clamshell

    Could the difference between those 2 being points and HEI? Or lacking accesory position?
     
  14. CJay

    CJay Supercar owner Staff Member

  15. BrianTrick

    BrianTrick Brian Trick

    One of the Chevelle vendors has the original 6-tooth sector gear. It was either SS396.com or classic performance. Maybe both. The ones I got are spot on to my originals.
     
    75Riv likes this.
  16. 75Riv

    75Riv A.K.A. Harry Clamshell

    Found it on ss396.com. Thanks.
     
  17. BrianTrick

    BrianTrick Brian Trick

    Classic Industries was the other one I was thinking of.
     
    75Riv likes this.
  18. BrianTrick

    BrianTrick Brian Trick

    F1FC70E4-4A9B-42C4-B373-D1E6A4F4F61E.jpeg Here’s the one listed in Classic Industries. 6 teeth.
     

Share This Page