Anyone know what application uses a preformed 90* bend 3/8" fuel line. I only need a piece 2" long on each side of the 90* bend. Or does anyone know what I can use to simulate this? I have a piece of metal line that's bent, but coupling it to the pump and the other piece of fuel line will require 2 clamps on each end, and I don't think it'll work out.
Hey Jeff, I would try Inline Tube. Their web address is" Inline-Tube.com" They seem to have a good selection. Brian
Oddly enough, the first pump I got Saturday (the one that was incorrect) came with a small piece of 3/8" hose already preformed into a 90* bend! So I'll keep the pump just for the hose. I went to an auto parts store today and he has nothing preformed like that.
I just realized that you needed a rubber preformed not steel. I hope you are able to locate it! Brian
Jeff, Are you talking about that rubber elbow for the in tank pump? I replaced mine with a 90*Nylon elbow that had hose barbs on each end. A brass fitting would be ideal, but nylon is all they had with the hose barb ends. And yes I had to use 2 short peices of hose on each end with 2 clamps, but so far it's worked well.
