It has 2.73 gears in it and is a c-clip rear end. 15/41 on the ring gear I've looked EVERYwhere on this axle and there is nothing stamped on it. I found some more numbers cast into the pumpkin 8969277 nf and GM62 This axle has bin fighting every since i started taking it out, nearly broke my arm and now its out and theres nothing stamped into the axle tubes. WHAT NOW? HELP PLEASE!
??? What are you looking to find from the axle tube that you do not already know NOW? If you want the rear ID-ed just post pictures I will help you and I am sure the other guys will too. Take care, Jim
well hears the diff. the cover is smooth by the way no ridge or any notches. I checked the pinion nut and it is 1 and 1/16 sized.
I'm not looking for yr mk and mod I just need to know if it is an 8.2 or a 8.5. I did a lot of looking around an FINALLY found out its from a 70-72 chevelle, from the casting numbers.
The lack of the casted ears at the 5 and 7 o'clock position of the housing may point towards the 8.2 variety.I'll bet Monzaz can tell you for shure with the picture.
R the housing covers interchangable between the 8.2 and the 8.5 cuz the 1 i have is smooth withOUT a ridge. or notches.
CHEVY 1o bolt 8.2 c-clip rear end. That is what is in the picture Open carrier (NON POSI) CArrier breaks are as follows 2.56-2.73 3.08 -4.88 Jim Posi unit from any 67-69 camaro, 65-71 Nova/ chevy II, 1970-1972 Monte carlo, 1965-1970 Impala, 1965-1972 Chevelle or El Camino. I also sell NEW EATON units if you like Hope this help for buying parts. Jim
The round housing covers are interchangeable between the chevy 8.2 and the 10 bolt 8.5, Yes... The notched cover (8.5 10 bolt) ONLY fits the Notched 8.5 10 bolt casting. The round cover 8.2 CHEVY or 8.5 WILL fit the notched casting rear. Jim
