I took the cover off of my pump and the cover pulled out pretty easily but plenty of rust. I looked inside the cover and the one contact was out of the slot and there was a small spring laying inside the cover. It was between the two contacts so I put the one contact back in place and put the spring in between them again and took a picture. I figured it was wrong so I removed the spring since I have no idea where it goes, I put the cover back on and now I can only get one bolt lined up to put back together. The other bolt does not grab onto anything, I try to pull the cover back off and the part pump part theat spins is now stuck to the cover and pulls out with it. I guess I need a new pump or this one rebuilt! Any ideas? Thanks Tim
Tim, I'm having trouble picturing what you are talking about. Sounds like the brush and spring have come out. Could you send that picture to ritc1@shaw.ca? Maybe I can help you out.
