How do I wire the kick down switch for a turbo 400? I have the bracket, pedal, and switch but do not see what to wire the switch into. The car is a 70 Skylark originally equipped with a turbo 350.
Look above your gas pedal. You should have a two female plug/connector. One will be a yellow wire and the other pink. The yellow wire is the same as for the radio, +12V. The pink wire goes to the fuse box firewall junction and then becomes a black wire w/white tracer to the trans. If you don't have the wiring, run a wire from "ign" fuse box terminal to switch and then another wire from switch to trans (You can use the speedo cable grommet in the floor pan to feed the wire to the trans)
