I just removed these a 1969 GM A BODY Chevelle.. this is Hotchkis upper arm set up & BAER brake rotors with corvette calipers . Rotors blasted , cleaned , epoxie painted & calipers painted cast . Good pads & ball joints , Upper arms only . Uses a late model gm spindal & Corvette C-5 caliper . Brakets & Rotors are BAER , upper controll arms are HOTCHKIS . All hardware in picture included to convert . 350.00plus shipping from 18974 Warminster pa Nick
Re: HOTCHKIS Frt upper contoll armsl & Bear 13" rotos w Corvette caliper spindal set What year car were these parts removed from? Thanks Brandon
Re: HOTCHKIS Frt upper contoll armsl & Bear 13" rotos w Corvette caliper spindal set Sorry Updated to A body 1968-1972 GM Chevelle Buick Cutlass GTO
So is there anything else needed to use these such as other thank stock lower control arms, steering components, or a drum brake matter cylinder?
Re: HOTCHKIS Frt upper contoll armsl & Bear 13" rotos w Corvette caliper spindal set I converted back to stock uppers & original disc spindals calipers . The Vette calipers & 13 rotors wont clear with stock wheels .. you will need 16 or 17 inch rims to clear calipers & 13 rotors . That is the reason for the change . The only difference is in the height of the spindal The controll arm corrects this height ..... This will work with stock lowers also ..... there was no valve on this car, why I do not know....... ? I am sure it should work wth a stock unit ? I am replacing with original cast iron valve for for wheel disc . The car has a rear wheel disc Brake conversion ....
Re: HOTCHKIS Frt upper contoll armsl & Bear 13" rotos w Corvette caliper spindal set I'd buy this in a heartbeat if I had the money. Interested in any trades? o No:
Re: HOTCHKIS Frt upper contoll armsl & Bear 13" rotos w Corvette caliper spindal set Sorry The Green Please :dollar: