im going to get a fiberglass hood which recommends hood pins( heavy duty) what pins have you guys used? Any pics Thanks Jaye
I like these myself.....................https://www.summitracing.com/parts/qul-ql-25-s Used a pair of them on a buddies Chevelle and they worked great.
I like the aero latch also but am concerned about locating the pin; their instructions shows cutting the hood but not locating the pin, which I think needs to be done before cutting the holes in the hood. Any pictures of your installed
Yea give me 30 min, you locate the pin like you would with any pin, but a pic is worth a thousand words
This is on my 70' steel hood.... You didn't specify if your fiberglass hood was a bolt on or a lift-off. Lift-off will require dzus fasteners on the sides and pins in the rear as well like photo below. Hope these pics help....Jim/Rott
Pics of the install on wife's Z/28 'glas hood: Not very good second pic, but you can still see where we mounted the pin on the fender/core support brace. This was because mounting on support would put the latch way forward past the hood edge. I plan on replacing the pins on my Skylark with Aerocatch.
GM made these. I found on Ebay for $75. And Yes these are for Buick. Rare. you can find these on Ebay Baldwin Motion . for $575.