Holley springs

Discussion in 'Small Block Tech' started by snowmad, Oct 2, 2003.

  1. snowmad

    snowmad Well-Known Member

    Witch of these Holley springs is the yellow and witch is the yellow(short spring)?:Do No:
    Ignore the white one.
    Lars
     

    Attached Files:

  2. dariggs

    dariggs Well-Known Member

    The one in the middle looks like it has more coils than the one on the right. Maybe the one with the least amount of coils would be the short one.:confused:
     
  3. car_man_76

    car_man_76 Goes fast with class!!!!

    Just a guess here but i think the one with the fewest coils (the one on the right) would be the short one it would be the one that would compress the most.
     
  4. Madcat455

    Madcat455 Need..more... AMMO!!!

    Goin' with the flow here:grin:

    The one on the right (less coils) is the short one. IF you look at the one on the right you can see that the bottom coil doesn't allow the spring to sit flat like the others. My short yellow spring sat flat, Your bottom coil looks bent and that is why there doesn't seem to be too much of a height difference between the two. On my spring kit the difference was Obvious.

    HTH:TU:
     
  5. snowmad

    snowmad Well-Known Member

    Reshape or trove away

    Thanks everybody!:beer
    I thought so my self, but wasnt sure
    When I got the spring kit, that spring locking like that!
    Shod I drop it in the paper basket or try to reshape it?
    It cant be hard to reshape it if one is careful and only uses the hands! :puzzled:
    Lars
     

Share This Page