gs 113 cam degreeing?

Discussion in 'Street/strip 400/430/455' started by 7 skylark 1, Jun 30, 2004.

  1. 7 skylark 1

    7 skylark 1 Well-Known Member

    i degreed my cam last night , i ended up with a centerline of 106.5, the cam card says it should be 109. is 2.5 degrees more advanced going to be a problem?? my dial indicator wasn't perfectly staight up on the lifter, just off a tiny bit, will this cause an error in the numbers?? i have the rollmaster with 9 keyways so adjusting it isn't a problem. thanks, dave
     
    7 skylark 1, Jun 30, 2004
    #1
  2. buick535

    buick535 Well-Known Member





    2.5 degrees advanced is not going to cause any problems, it will still run fine. Jim Burek
     
    buick535, Jun 30, 2004
    #2
  3. 87GN_70GS

    87GN_70GS Well-Known Member

    What does your DCR end up at?
     
    87GN_70GS, Jul 2, 2004
    #3
  4. 7 skylark 1

    7 skylark 1 Well-Known Member

    i have no idea. were do i find a formula. i don't think i will have a problem. static is 9.5 to 1.
     
    7 skylark 1, Jul 3, 2004
    #4

Share This Page