I am currently running Edelbrock heads on my 462 big Block. I am planning on a different build up this winter and "will be" interested in selling the Edelbrock heads late this fall. They were installed brand new and will have less than a couple thousand miles (estimated as my hot rod does not have an odometer) on them when I pull them off. If interested, I'll leave them on the motor, let you hear it run in person and then pull them off for ya! The heads are stock, non ported, like new, and run great. I've never had any issues with them. You can see and hear the engine run by going to http://www.youtube.com/watch?v=6S4Gf9bvM0c&feature=plcp . The heads in the video are the heads that will be for sale sometime around November or December. If interested, you can also email me at Jimmyjimbo61@yahoo.com. Thanks, Jim Howard NOTE: I may be interested in selling the complete motor due to the compression being too much for my new blower motor project.
Ryan, I'm still using them as of now. Dont really know what to ask for them! New ones sell for around $1800.00. I figured that I would set the price at $1250.00 for the pair. I dont know if thats a reasonable price or if its high, however, it seems fair to me. Give me your thoughts..... thanks, Jim ---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ---------- ALSO: as a note... These heads will NOT need to go to the machine shop. they are like new!
Made notes of everyone! Thanks for the replies. JUST AS A NOTE: It'll be a few months before I pull them off so please be aware of that! I'm going to a couple more car shows this fall before I pull the motor out and start the new buildup. Jim
I think Jim decided to keep them as I have never heard back from him and last post I saw of his he was selling the complete engine. I still want the heads but can't get him to reply via PM or post o No:
