My dad was driving our 2 door 75 buick custom, and the lock assy. jammed on him. We tried to get to the lock assy. through the little ash tray towards the back of the door, but that didnt work. We ended up rolling the window down all the way, and then going from the top and getting a rod to push on the level for the lock, that freed it up. Works a little stiff after that but its workin. Probably gonna spray it with some PB Blaster and let it soak, then throw some grease on it. While we had the door panel off, we looked at the window assy. The window is hard to crank, turns out that rod goin into the crank assy. is loose to the point you can move the rod up and down about 1". Anyone know where i can get a new crank assy.? Also, the orginal one is riveted on. Im guessing I'm gonna have to drill out the rivets and bolt a new one on...
