I have a 64 Skylark Conv that I have just installed disc brakes on. The disc spindles are off a 72 tempest/GTO and fit fine. The OEM rims will not fit. I have measured the back spacing of the OEM rims at 4". I am thinking about Crager SS rims. Has anyone else done this setup? I am wondering what back space to by in the new Cragers. 15" x 6" should work. Also, will the same Crager rims that fit the front also go on the rear? Any info is appreciated. Karl Eltzroth
64 Skylark wheels Adam, Do you mean I don't have to worry about back space if I use 15" wheels? Thanks, Karl
rims Karl I have a 64 skylark convertible that I put 15 Buick rims on with 255/60/15 tire on the rear and they fit. I am going to put 235/60/15 in front but I have drum brakes. I will also switch to disc next year.
from a wheelwell clearance standpoint, yes you do. From a disc brake clearance standpoint, no you don't. I assumed that you meant that the brake calipers were hitting your 14" wheels? I have zero offset 15x7 front wheels and 15x8 with a 5.5 inch backspace rear. You will need less backspace than me depending on the rear end you have and the brake drums (I have aluminum drums on my car). I am not sure if the later spindles add any width to the track, but would guess not? sorry for the confusion.
rima Adam, Thanks for clearing that up. Yes I did mean the front wheels and the disc brakes. Ed, Thanks for that info. I talked to the tire shop today and they said that sounded good to them. Karl
What I ordered I ordered Cragar Super Sport mags in 15" x 7" all around and Goodyear GT 225/60 for the front and 255/60 for the front. They had the tires, but I am waiting on the Cragars. Thanks for all the help. Karl