Well - of course I shoulda took a pic of the back of the dash on my 72 GS before I disconnected everything. Some of the wires are not so obvious on where they go. Anyone got a picture???? Jim
Let us know what wires you have. Colours, no. of wires in the connectors, shape of connectors etc.. Couple guys here can post a pretty clean image from the chassis manual, but not my set up. 2 small light sockets with gray wires not used without clock or tach.. Pink wiring set-up for speed alert speedo. All cars wired for this. Brown single conductor would be factory dash tach., if equipped. Black will likely be a ground. Not hard to help you as many here have the manuals.
This is the best i can do out of the manual with the tiny files this board allows. E-mail me at ritc1@shaw.ca for a large version unless this works good enough for you. I think you'll find most connectors only go on one way, theese things were designed for fast and idiot proof assembly, so if you have the dash sitting there, it's pretty obvious where most should all go with the different connectors. later Tim
maybe one of these pics might help they are from a `70 most of the connectors should just about fall right in place once you get going on a reassembly
