Cross Flow Rad Hold Down Plate

Does anyone have a 65 1/2 to 67 Skylark cross flow rad hold down plate.:TU:
Thanks Bruce

 

Bruce, I should have one If you want I can post a picture. I will be gone until Sunday let me know Thanks Bill.

 

Hi Bill,
Yes, thanks, it would be appreciated.
Bruce

 

Bruce will get you the pictures and info on sunday will be out until then. Thanks Bill

 

Bruce here are the pictures. I is not as good as I thought. It would need a little work. You can have it for the shipping and packing. Just send me $10.00 and that should cover the shipping/packing and gas to get it to the Post Office. Thanks Bill.

 

Hi Bill,
Thanks for the reply, kind of hard to tell from the pictures, do you think sandblasted, primed and painted, it would come up alright??

I did a quick search on USPS, from zip code 68105, (Omaha NE) it was $18.80 US funds air, or $16.60 ground, for a package 6 lbs 24 " x 3" x 9"
That zip code should be close to you. How about $25.00 US funds for your time and trouble, I don't want to see you cash out of pocket. If you can PM me your full name and mailing address I can send you a US money order.

Thanks Bruce

 

Bruce, thanks for the heads up on the shipping. I did not see you were up north. Not a problem shipping but this one is diver quality at best. Looks like someone droped the AC compressor on the center. If you are looking for a nice one I would keep looking. Thes are very hard to get straight. Thanks Bill.

 

Hi Bill,
Thanks for the reply, I'm going to hold out for one that's in a little better shape.
Bruce

 

I have a nice one and as soon as my replacement arrives i'd be happy to let it go. I am switching to a 4 row radiator and will need the wider version. this one is suitable for a 3 row and is yours free if you can wait a week or two. Bob

 

Hi Bob,
Thanks for the reply.
Would like it if it will fit.
I didn't know there would be different widths, I assumed the tanks would be all the same (wide) and they just changed cores, 2,3, or 4.?

Would your exisiting top plate fit a Summit rad, I'll have to measure it's width across the tank. (sum-380325) OA dimensions 25.25 L x 19 h x 2.25 w)
Your new top plate is it used or new after market.

Thanks Bruce

 

Hi,
The summit rad is 20 3/4" wide between the tanks, 26" O/A, 2 1/4" across the core, 3" across the tanks, 3 1/8" max width (outside welds)
Thanks Bruce

 

Bruce
mine is an original 65 crossflow plate. i'll post some pictures tonight after i get home from work. Bob

 

ttt
still looking :grin:
Thanks Bruce

 

I've got one, it is nice and straight just needs to be cleaned up, $30/shipped. It is from a '66 Skylark.

 

Hi,
Thanks for the reply. I'll PM you my shipping information, can you send me the cost of shipping and I'll send you a U.S. money order for everything.
Thanks Bruce