Condensor ?

Discussion in 'The Bench' started by kingeightballz, Nov 18, 2004.

  1. kingeightballz

    kingeightballz New Member

    Is it neccasary to have a condensor in order to have spark with a points system. I am sorry I can't remember, where does the condensor wire go to? and the lead coming from the points? I feel reel dumb, and trust me I've done a ton of searching on this subject w/o the answer i was looking for, so please don't blast me :rant: It's just been so long since I have had to dabble with this setup :spank:
    thanks ,
    Zach
     
  2. The Old Guy

    The Old Guy Joe Taubitz

    The condenser wire hooks to the points where the coil lead is. Without a condenser ,if it runs at all ,it will only run at very low RPM.
    :Do No: :Do No:
     
  3. kingeightballz

    kingeightballz New Member

    so it just gets parrelled with the points??
     
  4. jamyers

    jamyers 2 gallons of fun

    Yes, it's job is to "absorb" electrical current at the moment of points opening, so that the arc across the points contacts is minimized. Without one, the engine should run, but your points will burn themselves up in no time.
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    There is a single lead from the - side of the coil inside of the distributor. There is a single lead from the condenser. They both attach to the points at the same screw.
     

Share This Page