I have a 350 buick -70 and i have stumbel over a carb. it is a holley 3310-4160 but i can not get it to work good on the engine is there anybody who has some experience with this type of carburator what size of jets and acc pump Or is the carb to big for the engine Any help will be appriciated Regards Bengt J
Hello BJ.............the 3310 carb is 750 cfm and should have a 72 jets in the front with a 6.5 power valve for a good starting point..........Use a pink pump cam on the soft setting and like a #31 squirter...........Secondarys are fixed with a #21 jet plate...........Good luck, Jesse @ BIGS!!
So this carb is not too big for a 350 with mild cam? I have one I putt on a 350 with T/A 212 cam with stock everything else. The car seems to want too much advance or it will stall when put into drive. Can't figure out if I need a stall converter or if its the carb. Dan
