Carb Question

Discussion in 'Small Block Tech' started by lesabre, Jun 28, 2003.

  1. lesabre

    lesabre HOMER SIMPSON FOR PRES.08

    IF I RPLACED MY 2BBL CARB WITH A 4BBL WOULD I HAVE TO CHANGE THE TIMING?

    P.S.
    HOW DO U GUYS GET THOSE COOL ICONS
     
  2. 1970Stage1

    1970Stage1 Why Go Quietly?

    Carb Swap

    If you changed to a 4 bbl as a rule you leave the timing set at what it was with a 2 bbl. Depending on the comp. ratio, you might have to retard it to keep it from pinging with a 4 bbl. Can anybody back me on this, I'm only 80% sure. When you post a thread, look to the left of the text box you type your message in. select a smilie to put on the end of you sentence. It won't show up as a smilie until you post it. Instead, it'll show up as a "TU" for "Thumbs Up." :TU: Hope that helps, Kevin
     
  3. Smartin

    Smartin Guest

    I would at least check the timing when you get it back together. Just make sure everything is tuned....points, timing, all new ignition junk, etc.
     

Share This Page