Where do you find a base gasket for a qjet on a SP1 I am guessing it would be only for a perimeter type not divided. What did everybody do for a throttle cable anchor on the manifold? Oh yea one more what about a fuel line from a Stage1 fuel pump to the carb? TIA Rick
Disc AUto or AUtozone has Open Spreadbore intake gaskets. I used a Mr.Gasket universal bracket for the throttle cable (Autozone too). but I had to cut off some metal to get it to fit the Qjet. On the Fuel line. I just ran a rubber line up from the pump to the carb. Cut the existing metal line so I could use the fittngs and left about 2 to 3 in of metal hose for the rubber line to clamp to. Or you can get a new metal line and rebend it your self.o No: HTH
