Hello Nailhead fans, I just wanted to tell you a little about my good Fortune. You see my Grandpa worked for Buick for over 40 years. He was a Engineer at Buick and retired in the late sixties. My Grandpa was a real PACK RAT. He often would bring things home and well to make a long story short, he filled up a three car garage with Buick Nailhead Prototype parts. Well times are getting tough so it's time to go through all of these parts and see what exactly is all their. After two weeks of sorting I have found not one or two or three but, 42 SETS of ALUMINUM Nailvalve Heads! I also found some cast iron heads with, I don't know how to describe the ports other than WILD! I ran across every kind of rocker arm you can imagine too! Yes even some that were rollers. Intakes, Plenty of 'em 3X2's, 2X4's even a Tunnel Ram looking one made out of cast iron. Well with the Economy the way it is I have decided that it would be in my best interest to get rid of all of these parts. Yes it's time they found a new home. So you can imagine the $$$ I got once I loaded all of that ALUMINUM into my trailer and unloaded it ALL at the Recycling Center. Boy did I CASH IN! Gramps would be Proud! Your Buick Nailhead Buddy, Sloof Lirpa P.S. I almost forgot the best part! The two Aluminum Block 425's with Four Bolt Mains! P.P.S. My name is kind of strange as it makes more sense when you read it backwards!!!:Brow: :Brow::Brow:
You must be dreamin'. Because if you weren't you wouldn't be able to sit down & type this because of all the pain from the LUMPS on your knoggin' APRIL FOOLS!!!!!!!
