Buick cast iron dual quad intake

Discussion in 'Parts for sale' started by JJJerryJr, Apr 30, 2020.

  1. Bens99gtp

    Bens99gtp Well-Known Member


    You previous post said I only see the choke hooked up to 1 carb......

    So the front 4 cylinder will run extra rich when cold......but the rear 4 not?????
     
  2. stall1970

    stall1970 Well-Known Member

    This is what it looks like from the factory, original air cleaner and fuel line tee. The frt. carb is a 1972 Buick 800 cfm and back carb Chev. 780 cfm both carbs were built just day’s apart. There sitting on a 1970 stage 1 conv. Motor has stage 2 pistons KB 118 cam, scavenger headers and 364 gears
     

    Attached Files:

    rus, 1969RIVI and STAGE III like this.
  3. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Very cool and that rebuilt unit sold on EBay looks like a very fair price
     
  4. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    What fuel pump are you running ?
     
  5. stall1970

    stall1970 Well-Known Member

    Stage 1
     
  6. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    OK I see where it tees off now in the picture.
     
  7. hugger

    hugger Well-Known Member

    Hows it run?
     
  8. JJJerryJr

    JJJerryJr Member

    Can you tell me when this sold, or point me to that link on eBay? I’m trying to find it, but I really don’t know how to find something that has already been sold on eBay.
     
  9. stall1970

    stall1970 Well-Known Member

    Hasn’t ran the 1/4 mile but pulls very hard
     
  10. JJJerryJr

    JJJerryJr Member

    Ok everyone, it seems I am trying to sell this intake for a bit more than one that may have sold on eBay and it was complete. I am trying to find that listing. In the meantime, I am pulling this ad until I get more information. Once I get more info, I may put it back up for sale. Until then, the intake is no longer up for sale.

    Thank you all for your posts.
     
    STAGE III and Stage 2 iron like this.
  11. JJ, It was probably about 4 to 5 years ago that the manifold was on Ebay. I dont think you will find it in Ebay history

    I would list it on Ebay with a reserve. Make sure you link your Ebay listing here & facebook and any other Buick site.
     
  12. sriley531

    sriley531 Excommunicado

    This is sound advice. Place it on eBay with your bottom dollar price you'd let it go for as reserve. If it doesn't hit that price, you've in a sense done some market research on what may be the going rate and you can formulate a decision from there.
     

Share This Page