Billet Cranks

Discussion in 'Race 400/430/455' started by gmcgruther, Jun 16, 2011.

  1. gmcgruther

    gmcgruther Well-Known Member

    I recently talked to a guy on YelowBullet.com about billets Cranks and he said he can have Billet Buick Cranks made by Sonny Bryant in 3 months for 3k. I'm also gonna contact Hank the Crank,Cola,Scat,Pankl,OhioCrank,Callies,Kellogg,Kings,and Mittler Bros all for billet cranks for you guys and I'll list the prices for you too and time of wait.
     
  2. gmcgruther

    gmcgruther Well-Known Member

    Ok, here is the deal. There just isn't many billet crankshaft companies for one and number the ones I did call, need some Information to get it done like bearing width and length of journals stroke size and possible Drawings of crank layout and to keep cost down They need atleast a order of ten or more, The more they make the cheaper it is over all, but after they have all the tooling, and programming is through, the price will be set at the minumim amount of the very first order. So far Kellogg Crankshaft out Michigan , I'm waiting on call back, Kings Crankshaft wants $2700 and thats without adding mallory, 14 week turn around. , Pankl or should I say Superior Crankshaft need all the above information and order of 10 or more to keep cost down. But this group here is bar non the best in the world, don't believe me? Just go here and see for your self http://www.spcrankshaft.com/Crankshaft_our_team.php., Sonny Bryant can make the too ten or more and same information is needed and the price is 10k for one off or 10 or more $3500 to $3800 depending on order size and turn around time is 5 to 10 weeks., Scat Cranks need all the same information and order of ten or more and the price starts at $3100 and turn around is 8-10 weeks. It a boils down on the number that has to made but we are talking now about Billet cranks lighter and some as strong and some diffinitly stronger then Brand MDX. If anybody wants one of these companies to start on billet cranks for them and have ten or more wanting contact them, Spcrankshaft has gavin me a number to a guy at there shop that is the enginner there, here is the information for you to contact him. Name: Phill Jones pjones@spcrankshaft.com or 1-949-428-8788 ext. 107. Good Luck to you all. Gary McGruther
     

Share This Page