BeeHive Valve Sprins, Titanium Retainers and Keepers

Came off TA TE Stage 2 heads. Few run hours. $200

 

Are these springs speced more for a roller or solid tappet.......if solid tappet very interested especially if there is a part number I can more research to make sure they will work for my application.

Are the retainers and locks for buick style 3/8 valves or the thinner 11/16

 

11/16 valves. Roller solid cam. P/N Of springs is 26126, retainers 794-16 comp titanium retainers.

 

Possible interest. Who made the springs?
Can't cross reference that number for specs.

 

If they are used for solid roller they will be way too much pressure for my solid tappet

 

BeeHive? Can check the spring pressure used for setting up TA TE heads if it helps? The numbers are from retainer card by Comp. Can try to find invoice for springs if needed?

 

John are you interested in these springs? The bottom box, they are brand new pac.

 

I got a solid camshaft
I need more psi for the blower but not that much.

 

Ok