Attention.. users with posting problems

Discussion in 'The Bench' started by Jim Weise, Feb 19, 2004.

  1. Jim Weise

    Jim Weise EFI/DIS 482

    Guys, I made a change tonight that should cure the issues you have described.

    if your still having a problem posting, please PM me again.

    And Chris (cjp69) you need to email me outside the board, or give me a ring, as I changed your password, to use you as the test case to see if my fix worked. So I need to tell you the new password, I would typically email it, but did not see a email address in your registration, so you must have removed it.

    So get ahold of me, and I will tell you the password for your login, and then you can get back in and change it again.

    And you will be able to post again.

    Seems we had a little database error, when they were fooling with it to speed up the board, causing some posts to jump on with dates in the future.. that trips a couple things in the admin setup of v-bulletin, and I had to modify those options.

    I got a couple other PM's from other guys with the same problem, and I think you guys will be set to go.

    If not, PM me, and we will work with it on a case by case basis.

    Thanks

    JW
     
  2. Freedster

    Freedster Registered User (2002)

    Well, let's see if this works then...

    :)

    - Freed

    **********

    WooHOOO!

    :TU: :grin: :grin: :laugh:

    - Freed
     
  3. gs6970

    gs6970 New Member

    Jim,

    Chris here. Not sure when you posted the above message, the times look a little screwy. I tried calling they said you were out. I also emailed and PM'd you earlier with this username.

    You can email the password to me at chris.pollak@primus.com or PM me at this box.

    Thanks!

    Silent Chris (cjp69)
     
  4. bill lagna

    bill lagna Well-Known Member

    I was able to post again today after one of my post was dated 3-9-2031 and then locked me out. Boy , I got older quick!
    bill
     
  5. cjp69

    cjp69 Gold Level Contributor

    I'm baaaack!

    Thanks Mike and Jim for getting me back up and running!
     
  6. Jack Freeman

    Jack Freeman Well-Known Member

    Thanks, Jim. I, too, got one of the 3/9/2031 dates, but can now post.
     
  7. gs6970

    gs6970 New Member

    I'm out again, can't log back in.:Do No:
     
  8. cjp69

    cjp69 Gold Level Contributor

    I am now back in as cjp69!
     
  9. Smartin

    Smartin Guest

    Feeling ok Chris?:laugh:
     
  10. cjp69

    cjp69 Gold Level Contributor

    No.

    I can only imagine how much fun it most be to run the board and a business at the same time!!!!
     

Share This Page