Hey Guys, If your interested, check out this site for Pricing and contact information. http://xsperformance.net :bglasses:
Hey Pete, I'm not sure what kind of specs your after? Most of your questions should be able to be answered at the website listed above........... If there not, I'd send Mike an email or post it here and I'll asnwer it the best I can.
just on what the engine specs youd need to run a setup like this. and if itll work for a 350 :grin: pete
Yep..... The will work on a 350. As for motor specs, it will work on any configuration. The only thing that will be limited per motor is how much boost you can run per application.
thats awsome! is that what you have on your car? is there any catalogs or any other info i can get other then the website? pete
Yes that is what I have on my car. You can get more info on them at http://procharger.com Read under the Carb systems. http://Xsperformance.net however, is the only complany that makes the bolt on kits for the buicks.
I'm expecting 8psi when it's cooler out, and around 5 psi in 90+ degree weather. I just put a larger pulley on to drop the boost down and haven't run it yet (planing on running it later tonight). This install in still very new and I'm still working on tuning it in. I don't have any HP figures. Those are to come. At 5 or 6 psi, I'm expecting about 130 to 160 hp increase on pump gas. It's enough to KNOW it's there!!!!!!! My motor is a 9.8 to 1 455 with forged pistons, Roller Rockers, KB intake, ported heads and ect. you can find more here............................ http://www.v8buick.com/showthread.php?s=&threadid=20860
THATS COOL. I HAVE TO GET BACK TO WORK THOUGH. BEEN SLACKIN OFF ON THIS MESSAGE BOARD. ILL SEND YOU AN EMAIL TO PICK YOUR BRAIN SOME MORE WHEN I GET HOME TONIGHT... HOPE YA DONT MIND. THANKS FOR ALL THE INFO... PETE