I have an extra Addco 460 rear sway bar that I purchased earlier this year. It ended up not fitting my car properly, so Addco just custom bent me a new one. I'm not sure why it didn't fit my car, as in the trouble shooting phase with Addco, the measurments were all at factory specs. I think it's meant more for a Riv, as the bar was too narrow to follow the angle of the control arms. The bar is complete with hardware and mounting plates. The powder coating is a little banged up, as this essentially turned into a mock up piece. You could easily paint it and never know the difference. Item is located in Maplewood, MN. Retail is $190 - I'd like $100 + shipping. Thanks! :beer
Do you have an email address that I can send the pics to? The bar measures 36.25in wide from eye to eye on the inside, and 37.25in wide from eye to eye on the outside. Also measures about 10.75in deep. Let me know if you need any other dimensions. Also, I just want to add that the bar does have a small amount of paint overspray on the right half. Should come off with some paint thinner though.
It's a 1in bar. Addco lists the bar for a '61-'64 Buick Fullsize/Wagon and for a '61-'64 Pontiac Fullsize/Wagon. It may or may not fit other applications.
Bump! Just to sum up - Addco 460 1in rear sway bar. Comes complete with hardware and mounting plates. Spec'd for a '61-'64 Fullsize Buick/'61-'64 Fullsize Poncho. $100 + shipping. Thanks!
