I starting a new project and Im new to the buick scene so I need all the help I can get... Ive got a 1970 buick 350 to swap into my 86 v6 regal .. Im going to run a Ta 212 cam , mabey TA aluminum intake, carb , headers, and port the head with my stock v6 tranny.. What carb , headers and distributor should I use??? What else will need for this swap??o No:
the Buick 350 is what the G-body regal should have came with, a match made in heaven, why they bothered with that weak olds 307 I'll never know. Also they should have never stopped making the buick 350 in 1981. Good luck with your project, here's a couple pictures of mine.
Cool. I don't post on there a whole lot being from Lincoln, but I go by the same name on every board I'm on.
I was going to up grade the springs to some moog 5610 (little bigger) Do I also use those on the rear????
Motor is at the machine shop :TU: .. I going with 10.2 compression pistons .30 over and a Ta 212 cam or something comparable... Can any one give me some advice on a size and brand of a 4brl carb???