83 Regal NEW MOTOR in Kansas

Discussion in 'Cars for sale' started by steve_regal, Jul 6, 2006.

  1. steve_regal

    steve_regal Member

    Hey guys Ive got a very clean 83 regal. Paint is still glossy with very little rust at the bottem of the doors other then thats its good to go. Fillers a good, bumbers are good, vinal is good and when i say good I mean its shiny clean and rust, scratch and chip free. Interior is VERY GOOD no smell no scrapes cuts or noticable fading. dash is good no cracks or splits. this thing is nice boys. Motor is 73 350 no smog. I had the heads shaved with the bigger valves installed all new. 3 angle valve job and new rail, buttons, rocker arms and bolts. The push rods are new. lifters are new. Comp cam is new (I can get specs if you want. Ill try and get them posted)Timing cover is new with new bolts(TA). Timing Sprockits, chain, and key ways are new. Oil pump is new and packed ready to go. Harmonic balencer is new(TA). water pump is new with new bolts(TA). cleaned and painted pullys are on both. Intake is for a 4 barrel its been cleaned and reinstalled. Crank has just been fluxed and reinstalled with stock rods and pistons. all new bearings, seals, and gaskets. This motor hasnt been started. I took the v6 out and saved everything!!!! all brackets, power steering pump, alt. fan shroud i got it all!!!! Have new back shocks(not installed) 350 turbo tranny installed with motor. New motor mounts. whole engine bay is black under coating covered. IF you want to know anything let me know!! I have lost all interest. Im 22 and have been training to be a fire fighter with johnson county fire district 2 and have compleated my EMT-Basic training and will be going back to school in two months to get EMT-Intermeadiate/Defibulator :Smarty: I dont have the time or money to do this anymore :ball: and i would like to sell this car to help with school and buy some kinda of car so that i can give my parents back there truck. If you are interested let me know. I bought this car from a member about 3 years ago and would love to sell to one. Ive never sold a car before but here how it breaks down.


    WILLING TO SELL FOR $1000 obo.
    Its in Paola, Kansas
    My name is steve and you can reach me here or 913-449-6273 only serious offers please.
     
    Last edited: Aug 2, 2006
  2. regal8r

    regal8r Well-Known Member

    just sent ya an email :TU: do u have any pics of this car BTW??
     
  3. steve_regal

    steve_regal Member

    yup

    Hey i still have the car for sell. There is a local kid looking into it but i dont think hes up for the challange of putting it back togather. His comment to me was well its just like a chey aint it? :Dou:
     
  4. regal8r

    regal8r Well-Known Member

    what all would need to be put back together on it??
     
  5. buickdav

    buickdav Kris' other half.

    Steve,

    I could be interested. Please send pix to buickdav@yahoo.com , as many as you have. Also need the information that was requested above too. Whats it need to get back together ? I will try and give you a call.
     
  6. n2buick

    n2buick Well-Known Member

    Dave, if you come this way let me know.
    It's almost in my back yard.
    You'll have to stop by for a couple beers. :beer

    Jeff
     
  7. buickdav

    buickdav Kris' other half.


    Hell Jeff, if your buying beer I'll drive over just because........... :beer . We'll see what happens, I'll let ya know. If it goes that far you up for a inspection ?
     
  8. n2buick

    n2buick Well-Known Member

    Sure Dave, I can run over there.
    Not much of a Regal expert, but I'll do what I can.

    Jeff
     
  9. steve_regal

    steve_regal Member

    Sorry

    Sorry for the very long delay! I will work on the pics. Shouldnt be that big of a deal. Basicly hook up the wireing, and water lines. Get a distrubutor/wires, carb, headers or manafolds, and radeator. The stock v6 pipes are still under there too. you will have to put the drive shaft back in.....Its not alot of work for someone with time and the knowedgle. Ill try to get you a better idea soon and the pics will help. Like i said before I saves all the parts from the v6 and most will bolt back on...IE power steering, fan, shroud, pullys. Your bacily looking at a block with the timing cover, water pump, oil pump, intake on it. Of corse the oil pan and new pickup are installed as well..Its all under the hood work. Sorry im in a rush and ill try to get an update and pics asap
    thank you for the intrest

    steve
     

Share This Page