Very slightly used set of aftermarket axles for a 68-70 8.2 rear. I aquired these from a local guy, who wanted to change over to an 8.5 in his 68 GS, and had bought these because one of his original axles was bent. I believe he told me these were from Mosher Engineering. He was not aware at the time that the 8.2 axle is different, so we ended up getting him a new set for the 8.5, and I gave him a trade in on these. They will not fit an 8.5, as the spline is different. Complete with bearings and retainer plates, just install new studs and slide 'em in. $175 for the pair + shipping. JW
Jim - did you mean Moser for the axles ... and are these from a 68GS400 using the elusive RW507GR bearings ?
Alan, Yeah that looks better.. didn't think Moser should have that H in it... but I was in a hurry yesterday. They are out of a 68 Skylark rear end, and have a sealed bearing on them, as the seal was in the housing. I am not up to speed enough on these early rear ends off the top of my head to tell you if it is that particular bearing or not, but I can sure look into it. JW
... 68 Sky/GS350 rears were different than the 68 GS400 / Sporty rears with that wierd bearing size. The bearings alone - IF you can find them - are close to your asking price
Well then someone should snap these up quick, because they do have the RW 507 CR bearings on them. JW
Monzaz will sell them to you all day long for $69 a set including seals. http://www.ebay.com/itm/axle-bearin...ies&vxp=mtr&hash=item3cb8cd3dbe#ht_705wt_1169
interested, are these still available? so are these the 350 or 400? I have a 68 gs400 are these correct?
