A friend of mine converted his 67 Chevelle over to a 4 Speed and the 10 bolt 2:56 is not working well. It has a open rear now and he is looking for a something in the 3:42 to 3:55 range to make the 327 work better with the newly installed 4-Speed manual transmission. I figure a complete set up would avoid problems as far as drive shaft and bolt up issues. If I don't hear back on this post I will more then likely install a set of 3:55 or 3:42 gears as a kit, Thanks, AL.
Depending on where in MD you are, a friend of mine lives in Newark DE area. He has a 12 bolt posi w/ 3.31's. Its painted black and ready to go. Backing plate to backing plate, $800 His email is L881969@aol.com and his name is Matt
Thats not to far away. I'm just not sure on the changes that would be needed because the one that is in there is a 10 bolt. Do you know what year and model car its from? Thanks for your follow up :beer , AL.
I'm not sure if its the narrower 64-67 rear or not. I changed over to a Chevy 12 bolt in my Buick with no issues other than changing the rear Ujoint. Matt will shoot you straight, he knows his stuff :TU:
Chevelle Rear Needed I E-mailed him about the rear right after I saw your post the other day and he has not responded o No: , AL.
10 Bolt Rear Needed I did not think this was going to be a tuff one o No: . Still looking for a open or posi 3:55 or 3:23 10 bolt rear complete for a friend of mines 67 Chevelle, AL.
3:55 Chevelle 10 bolt rear needed Ed, he never got back with me then I found out he my buddy was looking for a 3:55 in a 10 bolt because he didn't want to have issues with the new installation, AL.