70 gs 4 speed $3,500

Discussion in 'Cars and Parts For Sale Leads' started by cjp69, Jun 8, 2010.

  1. cjp69

    cjp69 Gold Level Contributor

    somebody in CA should check this one out.

    http://sfbay.craigslist.org/eby/cto/1781501206.html

    1970 Buick GS, Original M-21 4 speed, 12 bolt, 350 car Now 455 converted properly.
    Engine is bored .030 over, align-bored, and Balanced, NEW Head Studs/Main Studs, New rocker studs and bushings, New Push rods, New Forged Pistons/Rings/Wrist Pins.
    Kenne-Bell custom cam, NEW Timing Cover Housing, water pump, Double Roller Chain and Gears, Deep Pan, Baffled, windage tray, Oil Cooler still in box.
    High Vol/Press oil pump, ATI Damper, MSD Ignition, headers,
    12 Gal fuel cell, New Electric Fuel Pump and Reg Plumbed in,
    New Holly 1050 Dominator on a CUSTOM Cool Runner (Water cooled under carb) single plain Manifold, New Flywheel, Throw-out bearing, pilot bearing, clutch fork and New Front Springs.
    Emergency shut off switch on right rear side light.
    Has stock drive shaft and Rear end
    Needs radiator, clutch/pressure plate assy, bell housing and shifter.
    $3500 FIRM!
     
  2. mritter

    mritter Well-Known Member

    Hmmmmmm.
     
  3. 68riviera430

    68riviera430 BRRRRAAAAP!

    They painted the engine black, bummer...
    Im about 2 hours away if anyone is really serious about this car.
     
  4. donny1973

    donny1973 Well-Known Member

    Original M21??? Not!
     
  5. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN

    If this was on the e3ast coast it would be in my freaking driveway allready!!!

    Your buying an engine and getting a free GS attached to it!!!


    Come on fellas, someone grab this and save it, doesn't look half bad and it's a west coast car!!!!!
     
  6. BuickGSrules

    BuickGSrules Gold Level Contributor

    I have emailed seller but no response yet. Emailed him this morning so I might hear something tomorrow.
     
  7. slamjob

    slamjob Well-Known Member

    What a deal!!!!!!!!!!!
     
  8. Twinn

    Twinn Member

    I wish I was not working in Iowa right now...if the body is not rotted away I would be all over it........Damn, my luck too

    If anyone gets a phone # for the guy I would really like to talk to him about it

    I have a friend in Suisun that would probably help me move it....

    :3gears:
     
  9. This one will be coming back to Mass. at some point. It's in NV right now.
     

Share This Page