69 350 rebuild

Discussion in 'Tri Shield Performance' started by eddie, Aug 19, 2020.

  1. eddie

    eddie Well-Known Member

    is it possible to 400 hp out of a 350 and still be streetable daily driver
     
  2. RIVI1379

    RIVI1379 Well-Known Member

    Yes and yes....look at TA PERFORMANCE for the parts...with 10:1 compressions heads and intake assuming adequate fuel delivery and away for it to all get out... it sure can be done
     
  3. eddie

    eddie Well-Known Member

    Thanks
     
  4. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    You'll need ported heads, or TA aluminum heads. You'll need to rev the smaller engine higher to make more HP, and that requires a bigger cam. Bigger cams make the engine less streetable. Better heads allow you to use a smaller cam and still achieve your HP goals with better street manners.

    http://www.taperformance.com/products.asp?cat=421

    http://v8buick.com/index.php?thread...1-street-eliminator-se-cylinder-heads.348160/



    TABuick350DynoSheet.jpg

    Over 10 years ago, with iron ported heads,

    http://v8buick.com/index.php?threads/one-hot-350-were-still-not-done-either.197839/
     
    Last edited: Aug 21, 2020

Share This Page