Need to replace the rear coil springs on my Cat. Looking for a nice pair I stumbled upon several different springs, but it is very hard to get some information on them. Moog: CC503 5329 6363 What would be the best choice when in the future a propane tank (about 150lbs) will be added in the trunk? (gastank will be filled with just a few gallons) Still I don't want the Cat to look like a 4WD Maybe a combination with load adjusters?
One more try: TTT Have to order this week for I will be flying to the US in 2 weeks; any suggestions or help appreciated. Otherwise I have to choose blind and find out whether it was a good choice once mounted. Thanks
Not sure if this really helps, but here goes- When I replaced the rear springs on my 66 Wildcat, I went with 5329's. I did a quick search and the part numbers are the same for both of our cars. Here are some recent pictures of the stance about 1 year later and with about 150 pounds worth of tools, jacks, spare, etc,,, in the trunk. I almost went with the CC503 to keep the rear up a little bit, but being a 4 door, I didnt want it to be too high.
William, exactly what I needed to know and see. 5329 it will be! BTW: Love the photo with your Cat and the Buick logo :TU:
