Takeoffs, spares, and leftovers from my GS 400. I want these to be used, and I want them out of my limited garage space. All prices are negotiable, open to bundling too. Item 1 Engine - $200, you pick up Stock '68 GS400 long block, 82k original miles, running but noisy when pulled. Head part numbers don't match, one must have been replaced before I got the car. No intake manifold, no rocker assemblies, oil pan is a later big car type. Complete and installed stock cam, lifters, pushrods, heads, timing cover, balancer, fuel pump. Item 2 Rocker Assemblies - $40 plus shipping One set later model clearance ground for big springs, one set stock early model 1.60 ratio. Most hardware and bolts included, have not counted these bits. Item 3 used Popular Mechanics cam and lifters - $40 plus shipping Famous (or infamous) "fast ramp" cam, has about 15k miles, replaced with Scot Brown small cam. Lifters are not necessarily paired with lobes - use lots of lube. Item 4 Oil Pump - $10 plus shipping Miscellaneous parts including HV gears and plate, springs, gaskets, etc. Item 5 valve covers - $20 plus shipping Later model (horizontal ribs) painted red with kinda moldy gaskets. Item 6 flexplate - $10 plus shipping Don't remember why I have it, I'll check the ring gear for damage before I sell it to you. Item 7 Water pump - $5 plus shipping Kept it cause it worked, might have been short snout and I needed a long snout with my belts. Item 8 Quadra-Jets (2) - $35 plus shipping One came on my '68 GS400 but codes to a 350 car, worked when pulled the other is a 800 cfm later model and is a core. Includes all of my leftover gaskets, jets, metering rods, etc. Sorry the pics are sideways, hope you find something you can use.
Got the 400 exhaust manifolds John - interested if they are available, and not cracked - pm me ! :TU:
TTT - Here's a mostly complete set of cores to build your own BBB! I also have a TH400 core that goes with all of these good parts. Somebody give me an offer - I am a motivated seller, just want this stuff gone and I'd hate to scrap it out.
interested in the 1.6 rockers. can you describe the condition of and post pics of the wear surfaces please:TU: MarkO