67 GS400 driveshaft length

Can somebody tell me what the stock driveshaft length is for a 67 GS400 with a th400. thanks, Bob

 

I just went outside and measured on a #s matching original drivetrain gs 400 400 tranny.It is 60 3/4" from one end to the other. same spot as in picture on each end is where i measured from. :TU: Mike

 

Thank you very much. thats helps a bunch. Bob

 

Length is usually specified from the center of one u-joint bearing cup to the other.
But if you refer to these directions from Denny's Driveshaft, it's a different definition:
http://www.dennysdriveshaft.com/how_to_measure.html

I'm sure Bob is clear on your measurement, but others might not be!