'67 Auto Floor Shift Steering Column, Non-tilt and restored/highly detailed. Pulled from a '67 Cutlass and will also work in Buicks and Pontiacs. $250 + shipping. >Completely dismantled, degreased, cleaned, etc. Not pitted or hammered with rust before I started the process. >Painted parts beadblasted to bare metal, prepped and primed/painted with PPG DP90 Epoxy >NEW correct turn signal wiring harness....not a generic type that requires an jumper harness (cost $65) >Upper column (the part you see coming out from the dash) is also in DP90. It can be wiped down, scuffed and painted to whatever interior color you have. >Lots of nice detail on various parts, plating, natural steel finishes, black oxide, etc. This column would be at home in a concours type car if that's what you need. >It'll need a new or nice used turn signal stalk. >I've made a new vinyl "cover" that wraps around the expanded metal/mesh on the lower outer column. Final assembly once it's sold. Shipping in a HD shipping tube. Pics below. I can send more to anyone that's serious about the column.