I can't believe that with all the 67 stuff I've gone through I don't have (read lost) a correct water pump pulley. Help, please! :beer Thanks Harvey
Hi Harvey How can I tell if I have a "67 400" pulley? I should still have my "pile-o-pullies" somewhere, but if I find them and dig through them.... I won't have a clue what is what. :laugh: Is there a significant difference I can look for? o No:
Hi Rick Judging from the one that I have, the pulley will be 2 3/4" deep and between 5 and 5 1/2" in diameter. It is a two belt pulley. Any help is greatly appreciated! Harvey
Part number on the pulley face = 1375146 ( 2 groove 5 5/8 " diameter). It was also found on some big cars with AC that year.
Rick I double checked and the depth will be closer to 2 5/8" rather than 2 3/4". 5 5/8" is good for the diameter. I hope you can find one! Thanks again Harvey
Hello Harvey, I'll dig through my stuff tonight and see if I have one that meets your specs. My 400 only came with the single groove water pump pulley but I might have a dual grove pulley from my 430. I'll let you know either way. Cheers,
Todd & Rick I thought that I needed a double water pump pulley, but checking in my service manual, the power steering pump is driven directly off the crank pulley. I thought that the PS belt wound around the water pump pulley but not so! ou: Therefore a single pulley or double will work for me as long as the pulley is approx. 2 5/8" deep. Sorry about the confusion. Todd, I saw Rick on the weekend and he still has your door panels. He is on the road again but I think he's planning on being back in 2 or 3 weeks. Harvey
Hi Harvey I "might" have a pulley for you.... It's 5 5/8" overall outside diameter - double grooved. It measures 2 3/4" overall height. (2 5/8" would be about the inside height?) But the part number is 1235778 This is the exact same pulley I'm using on my 67 ragtop, but I have a 455 in it, and I'm using "later model" PS brackets and an alternator bracket that I have no idea what it came off of. Not sure if this will work for you or not. I'll let you be the judge. o No: If you want it..... $5 plus shipping and it's yours. :beer PS... I also have a #1235827 which is about the same exact thing, except that it's only 2 3/8" overall deep. Maybe the number guru's can help us out?
Harvey If that doesn't work out I KNOW I have one for ya.. had a set and then my dad dropped the motor and destroyed the crank pulley.
Todd and Jake, Thank you very much for your assistance. Rick sent a pulley today. If it's not the correct one, I'll be in touch! :beer Harvey
There was a no AC pulley that year for a 67 4600 series car #1375141 ( 1 groove) but it = 6 3/4" diameter. So if that diameter will not work I assume that yours was the smaller 2 groove pulley I listed above.