66 AFB choke conversion

Discussion in 'The Mixing shop.' started by tysongross, Jan 5, 2011.

  1. tysongross

    tysongross Well-Known Member

    What are my options if I want to switch to a manuel or electric choke on my afb from the exhaust choke system on it now?

    Also does anyone have a part number or recomend where to find one?
     
  2. SpecialWagon65

    SpecialWagon65 Ted Nagel

    I talked to Carmen about this. I think he can do it pretty easily.
    I'll have to get this for my dual quads.
    Ted
     
  3. 12lives

    12lives Control the controllable, let the rest go

    NAPA has an electric kit. Do a search on this board for the discussion.

    - Bill
     
  4. tysongross

    tysongross Well-Known Member

    Reason I wanted to do this was because the tube that goes to my choke was broken. I just saw a picture where somone had used some soft copper tubing as a replacement and it doesnt look to crappy I might just try that.
     
  5. tysongross

    tysongross Well-Known Member

    k so here is a picture of what it looks like.
     

    Attached Files:

  6. telriv

    telriv Founders Club Member

    The hot air supply tube pictured is on the wrong part of the manifold. It should go to the rear, upper part of the manifold & the other end, that is now installed at the choke housing goes to the fresh air feed on the rear of the carb. directly under & behind the air cleaner housing.
     
  7. 12lives

    12lives Control the controllable, let the rest go

Share This Page